Kifco-Caprari PTO Pumps are designed to suit all types of irrigation systems. These rugged and efficient pumps are usually supplied mounted on a two-wheeled cart, which makes them very east to handle. An optional three-point linkage frame is available at a nominal cost. A very dependable step-up gear box is an integral part of these well proven pumps. The gearbox shafts are supported by heavy-duty, widely spaced bearings. The box is oil lubricated and some models are also water cooled.

Slurry Pumps

Model NT120S

Single stage, closed impeller, centrifugal pump with mechanical seal and integral gearbox. The wide design impeller is capable of passing a maximum 5/8" solid. Four gearbox ratios are available. Two are designed for PTO pumps with input speeds of 540 or 1000 rpm. The other two are made to run direct from an engine. The direction of rotation for the engine drive pumps is opposite to the PTO pumps.

Model FRT94/35

Single stage, open impeller, centrifugal pump with a mechanical seal and integral gearbox. It will pump most animal waste slurries except long fibrous material, which must first run through a chopper. The pump includes a stationary knife that will slice through materials that build up at the eye of the impeller. The pump is very aggressive with the material being pumped. The pump volute and impeller are made from spheroidal graphite (SG) iron, which is twice as strong and four times tougher than regular iron. The input speeds are the same as the NT120S above.